Features:
Remove Click & Crackle: Buffs out scratches, and restores your vinyl LP collection quickly and easily. With a single slider, SoundSoap removes pops, clicks and crackles without affecting the audio you want to keep!
Noise Tuner: Helps you "tune in" hiss and other background noise you want to remove. The Learn Noise button automatically sets this control for you — or if you like, you can grab it and adjust it manually.
Wash Window: SoundSoap's unique Wash Window lets you listen — and watch — while it goes to work. The left side of the display shows the unprocessed signal, while the right side shows it after it's been cleaned. (blue = desired audio signal; red = noise).
Noise Reduction: The amount of roise reduction being applied can be adjusted manually with the Noise Reduction knob (or automatically by clicking Learn Noise). A low setting is good for subtle noise; for bigger problems, just crank it up and listen to the noise evaporate.
Enhance: After you've cleaned your audio, leave a super fine polish with SoundSoap's unique Enhance Slider. This intelligent dynamic control brings back any missing frequencies, and leaves your finished audio sparkling clean.
Transport/Timeline/Counter/Apply: These additional controls are found in the stand-alone edition of SoundSoap, and are used to start and stop playback, navigate media files, and apply noise reduction settings.
Remove Rumble: With one button, SoundSoap virtually eliminates low frequency noise, or "rumble" including turntable motor noise, an idling truck captured in a recording, or any similar such noise below 40 HZ.
Remove Hum: SoundSoap removes hum (typically introduced by electrical grounding issues) with just one click. Choose 60 HZ (for regions with ~120 VAC electricity) or 50 HZ (for regions with ~220 VAC electricity).
Learn Noise: The key to SoundSoap's "One-Click" audio restoration! Just click Learn Noise and in seconds, SoundSoap automatically profiles broadband noise in your signal and adjusts the Noise Tuner and Noise Reduction knobs to their ideal settings.
Broadband: These controls allow toggling Broadband noise reduction between Off, On, and Noise Only modes — Noise Only lets you hear what's being removed with the current settings, so you don't remove the signal you're trying to restore!
Enhance: After you've cleaned your audio, leave a super fine polish with SoundSoap's unique Enhance Slider. This intelligent dynamic control brings back any missing frequencies, and leaves your finished audio sparkling clean.
System Requirements
Mac
G4, G5, or Intel-based Mac (≥500MHz processor)
Mac OS 10.3.9, 10.4.3, or 10.5.1 or higher
Stand-alone edition requires QuickTime 7 or greater
Windows
Intel Pentium 3/4, or Athlon with SSE Instructions (≥600 MHz processor)
Windows XP Home/Professional, Windows Vista or Windows 7
Windows Media 9 & QuickTime 6.5 (stand-alone mode)
Both
128MB RAM minimum
20MB available disk space
Plug-in requires compatible Audio Units, RTAS or VST host application
Color monitor, minimum 1024 x 768 resolution
|
