Features:
UniMount® clip permits accurate positioning, provides shock resistance and protects element
Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
Extended frequency response captures subtle nuances of the performance
6' (1.8 m) cable permanently attached between microphone and power module
ELEMENT: Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN: Cardioid
FREQUENCY RESPONSE: 50-15,000 Hz
LOW FREQUENCY ROLL-OFF: 80 Hz, 18 dB/octave
OPEN CIRCUIT SENSITIVITY -45 dB (5.6 mV) re 1V at 1 Pa
IMPEDANCE: 250 ohms
MAXIMUM INPUT SOUND LEVEL: 145 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE (TYPICAL): 115 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO: 64 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS: 11-52V DC, 2 mA typical
SWITCH Flat, roll-off
WEIGHT (MICROPHONE): 0.3 oz (8 g)
WEIGHT (POWER MODULE): 2.9 oz (81 g)
DIMENSIONS (MICROPHONE): 0.98" (25.0 mm) long,
0.40" (10.2 mm) diameter
DIMENSIONS (POWER MODULE): 3.66" (92.9 mm) long,
0.74" (18.9 mm) diameter
OUTPUT CONNECTOR (POWER MODULE) : Integral 3-pin XLRM-type
CABLE: 6.0' (1.8 m) long (permanently attached to microphone), 0.10" (2.6 mm) diameter, 2-conductor, shielded cable with TA3F-type connector
ACCESSORIES FURNISHED: AT8418 UniMount® microphone instrument mount; AT8538 power module; soft protective pouch
AUDIO-TECHNICA CASE STYLE M12
|
