Features:
Designed for high-quality sound reinforcement, professional recording and broadcasting
Superior off-axis rejection for maximum gain before feedback
UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
Easy-to-adjust, rugged, small-diameter, alternating gooseneck with virtually no “memory” permits quick positioning into desired shape
UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
Accepts interchangeable elements to permit angle of acceptance from 90° to 360°
Two-stage foam windscreen yields dramatically improved resistance to P-pops and other breath blasts
Direct mounts to any 5/8"-27 stand, or to included threaded mounting flange
Operates on battery or phantom power
ELEMENT: Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN: Cardioid
FREQUENCY RESPONSE: 30-20,000 Hz
LOW FREQUENCY ROLL-OFF: 80 Hz, 18 dB/octave
OPEN CIRCUIT SENSITIVITY Phantom: –42 dB (7.9 mV) re 1V at 1 Pa
Battery: –43 dB (7.0 mV) re 1V at 1 Pa
IMPEDANCE: Phantom: 200 ohms
Battery: 270 ohms
MAXIMUM INPUT SOUND LEVEL: Phantom: 133 dB SPL, 1 kHz at 1% T.H.D.
Battery: 123 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE (TYPICAL): Phantom: 109 dB, 1 kHz at Max SPL
Battery: 99 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO: 70 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS: 11-52V DC, 2 mA typical
BATTERY TYPE: 1.5V AA/UM3
BATTERY CURRENT / LIFE: 0.4 mA / 1200 hours typical (alkaline)
SWITCH Off, on-flat, on-roll-off
OUTPUT CONNECTOR (POWER MODULE) Integral 3-pin XLRM-type
CABLE: 9.8' (3.0 m) long (permanently attached to microphone), 0.13" (3.2 mm) diameter, 2-conductor shielded cable with TA3F-type connector
OPTIONAL INTERCHANGEABLE ELEMENTS: UE-H hypercardioid (100°);
UE-O omnidirectional (360°);
UE-UL UniLine™ (90°)
ACCESSORIES FURNISHED: AT8531 power module; AT8153 two-stage foam windscreen; AT8663 A-mount flange; AT8664 A-mount cable pass-through adapter; battery
AUDIO-TECHNICA CASE STYLE M2
|
