Built into a compact ½ rack chassis, we used the same Burr-Brown IC's for the Mic Pre that you'll find in our more expensive studio channels. We then added an extremely musical EQ section and an optical Compressor, for that signature "Meek" sound.
Features:
Input impedances: Mic: 1.2kohm; Line: 20kohm
Pre-amp overall gain: 0dB to 60dB
Common mode rejection: 70dB
Equivalent input noise: -128.5dBu (unweighted)
Distortion: 0.001% (below Compressor threshold)
Frequency response: 10Hz to 70kHz (-3dB)
Maximum input before clipping: Mic: +19.5dBu; Line: +44.5dBu
Headroom before clipping: +19.5dBu
Compressor threshold: +∞dBu to -20dBu (variable)
Compressor ratio: 5:1 (typical)
Compressor attack time: 1 msec to 100 msec (adaptive)
Compressor release time: 0.1 sec to 3 sec (adaptive)
EQ Boost and Cut: +/-15dB (zero phase-shift bell response)
LF Frequency: 80Hz (fixed)
MID Frequency: 300Hz to 5kHz variable
HF Frequency: 12kHz (fixed)
EQ “Q”: 0.9 (1.6 octaves)
Output Gain: -∞dBu to +16dBu (variable)
Nominal output levels: +4dBu/-10dBv (selectable)
Output impedance: 75ohm
Output Level switch: 12dB attenuation
Noise Floor: -85dBu (typical, with ~40dB mic gain)
VU Meter: 8 segment bargraph
Power supply: 12V ac mains adaptor
Power consumption: 12W
|
|
|
 |
