The TD-X takes the popular MD-3 Micro Delay circuit and combines it with a custom-designed filter array that allows the TD-X to emulate a vast variety of vintage and modern delay sounds. Like the MD-3, the TD-X features 2600 milliseconds of delay time with Delay Level, Delay Time, and Feedback controls with switchable Short, Medium and Long delay ranges. Using these controls an entire range of classic delay effects can be achieved; from rockabilly slapback to Arena-rock washes of excess to sound on sound layering that slowly fades into infinity. Also like the MD-3, the TD-X can be used to create erratic, runaway echoes and self-oscillation by manipulating the Delay Time and Feedback controls.
Unique to the TD-X are its two Simulator controls. While most digital units emulate analog tones by using a high frequency roll off, the TD-X uses a frequency filtering system combined with tube warmth and saturation for a unique, organic delay tone that is much more realistic than digital modeling.
The Analog Simulation control blends in tube saturation on the Delay Repeats against the unfiltered Delay sound. This saturation is similar to the effect of an Analog Delay unit on the original signal, where note clarity decreases with each additional repeat.
The Tape Simulation knob blends in a preset EQ curve against the unfiltered Delay sound. This EQ curve cuts ultra lows and high frequencies and boosts lows and mids, similar to the sound of a vintage tape echo unit. By adjusting these two controls accordingly, a virtually limitless variety of tonal nuances can be added to the Delay repeats: Set the Analog Sim on 2 for a slightly gritty Delay tone; or for a warm, dark Delay set the Tape Sim on 5. For extreme distorted Delay, put both controls on 10. The possibilities are only limited by your imagination!
To round out the package, the TD-X features dual Outputs (Wet and Dry), allowing the user to run it in stereo with multi-amp setups or when recording. The TD-X also features True Bypass Switching using a 3PDT mechanical switch to assure transparent operation in bypass.
|
|
|
 |
