Features: Mix: Mixes the dry and the wet signal. Set at 12 you can hear the guitar go through Decay: Determines the length of the spring, that is emulated Hicut: Cuts the high notes on the tail of the reverb. Giving the tail a smooth sound Level: Controls the output volume Gain: Controls the level on the input signal. With the this knob you can turn down the input signal, if it is too powerful. The green light on top of the pedal will go red, if the input signal is too high and makes the pedal distort. Reverb types: Spring Sounds like an old vintage Fender amp with the typical spring based reverb Room Typical room reverb. Like a clinic in a small room Hall Sounds like a big concert hall FSO Reverb with chorus Pedal gives stereo output through the left and right output jack plugs. Input Impedance @ 1 KHz: 880 KOhm Output Impedance @ 1 kHz: 24 Ohm Power supply: 12V DC Minimum Power supply Voltage: 10,8V DC Maximum Power supply Voltage: 12,5V DC Current Draw @ 12V DC:285 mA Maximum input signal Vp/p: 3V p/p. External connectors: Input Jack. Output Jack (R), Output Jack (L), 12V DC jack Controls: On/Off, Level, Mode, Mix, High cut
|