Precision versatility
Not only does PolySwitchAB let you split your stereo signal and switch between outputs. It also works “backwards”, letting you run two separate stereo instruments into a single amplifier or other signal destination. And with every input and output available in stereo, it’s a great solution for keyboardists or anyone else needing to route a stereo signal to two destinations or two stereo signals to a single stereo in.
Signal integrity
As you’d expect from a T-Rex product, PolySwitchAB is specially engineered to protect the natural integrity of your sound – all the way through the signal path. True hardwire signal routing, top-grade electronics, and a built-in buffer switch for low-level signals caused by long cables, for instance, make sure you don’t lose a single ounce of your precious tone.
Features:
Input Impedance @ 1KHz with buffer OFF: 3,5Mohm
Input Impedance @ 1KHz with buffer ON: 862Kohm
Output Impedance @ 1KHz with Buffer OFF: >10Mohm
Output Impedance @ 1KHz with Buffer ON: 120Ohm
Power supply: 9V DC (Power tool 9)
Minimum Power supply Voltage: 8V DC
Maximum Power supply Voltage: 12,5V DC
Current Draw @ 9V DC: 19mA
Maximum input signal Vp/p With buffer OFF: Input = output. No limit
Maximum input signal Vp/p With buffer ON: 4Vp/p
Battery Type: 9V battery 6F22
Battery Life: 5 to 8 hours
External connectors: Input(L), Input(R), Out(A)left/ Right, Out(B)left/ Right
Controls: On/Off, buffer
Depth: 120mm
Width: 110mm
Height: 55mm
Weight (excl. Battery): 430g
|
|
|
 |
