Opto-coupler circuitry produces the shimmering, watery filtering of legendary vintage units. Threshold and Peak sliders control the degree of effect; while Range and Drive switches determine range and direction of the filter sweep. Three selectable filter types (Low Pass, Band Pass, and Hi Pass) and a frequency range of 100 Hz – 4 kHz allow the AF9 to function with virtually any instrument or input signal.
Features:
Input Impedance 500K Ohms
Input Jack 1/4 inch standard phone jack
Output Impedance 10K Ohms
Output Jack 1/4 inch standard phone jack
Output 1
Residual Noise -95 dB or less (input shorted IHF-A weighted)
Filter Frequency 100 Hz 2 KHz (Low) / 200 Hz 4 KHz (High)
Controls Sensitivity, Peak
Switch Normal/Effect (true bypass configuration), Filter LP/BP/HP, Drive Up/Down, Range High/Low
Power Supply 9V Manganese dry cell battery (6F22) or special AC adaptor
Power Voltage DC9 V (Battery) / DC10 V (AC-adaptor)
Current Consumption 17 mA (9 V) / 19 mA (10 V)
AC Adaptor AC210N (option) Input: AC120V Output: DC9V/200 mA Center - / Sleeve +)
Dimensions (whole) 74 mm (W) x 124 mm (D) x 54 mm (H)
Weight 580 g
Accessories 9V Manganese dry cell battery (S-006P) x 1
Warranty Card x 1
User's Manual x 1
|
|
|
 |
