Gold Box Distortion is a classic handwired tank of a box delivers a wide range of sonic distortion from a subtle, warm, tube-driven tone to balls-to-the-walls searing hot overdrive, with that vintage sustain and classic tone you grew up with.
Input Jack: Connect a cord from your instrument here. Removing the cord from the input jack when not in use disconnects the battery which will prolong battery life.
Output Jack: Connect a cord to your amplifier here.
9 Volt Input: Connect an optional power supply here. Accepts an industry standard 9 volt regulated DC supply with a 2.1mm barrel type connector.
Output Level: Controls the overall volume when the effect is engaged.
Distortion: Controls the amount of distortion applied to the signal.
Status LED: Illuminates when the effect is active.
Footswitch: Turns the effect on and off. When off, the unit is completely removed from the signal path (True Bypass).
Battery Compartment: Remove 4 screws on the bottom of the unit to access the battery. Be sure to leave the protective insulator in place to prevent the circuit board from contacting the metal case.
Made in the U.S.A.