Red Box is best known best for its crisp, percussive attack as well as its lush, rich sustain while maintaining the natural, clear tone of your guitar.
Input Jack: Connect a cord from your instrument here. Removing the cord from the input jack when not in use disconnects the battery which will prolong battery life.
Output Jack: Connect a cord to your amplifier here.
9 Volt Input: Connect an optional power supply here. Accepts an industry standard 9 volt regulated DC supply with a 2.1mm barrel type connector.
Output Level: Controls the overall volume when the effect is engaged.
Sensitivity: Controls how much compression is applied to the signal. Turning the control clockwise applies more compression resulting in increased sustain by limiting the loud peaks and boosting the soft parts of the signal.
Status LED: Illuminates when the effect is active.
Footswitch: Turns the effect on and off. When off, the unit is completely removed from the signal path (True Bypass).
Battery Compartment: Remove 4 screws on the bottom of the unit to access the battery. Be sure to leave the protective insulator in place to prevent the circuit board from contacting the metal case.