What do you do when you need to connect a low volume –10dBV output (like MP3 player, or CD player) into a high volume, +4dBu input (like the FOH PA Mixer or multi-track digital recorder)? What you need is one of our Line Level Shifter® from Ebtech®!
The Line Level Shifter® uses the physics of inductance and impedance matching to increase or decrease the signal voltage without the added noise of active electronics. The Line Level Shifter® also converts back and forth between balanced and unbalanced signals automatically. This is great because most –10dBV signals are unbalanced while most +4dBu signals are balanced.
The Line Level Shifter® also contains Ebtech’s Hum EliminatorTM technology to break ground loops that cause AC hum.
Features:
Converts back and forth between –10dBV and +4dBu
Converts automatically back and forth between balanced and unbalanced lines at either end
1/4" TRS “smart” jacks (tip, ring, sleeve) inputs and outputs.
Built-in Hum EliminatorTM technology eliminates AC hum / 60Hz buzz and noise
Automatically translates signal voltages to match differences in ground potentials, avoiding clipping
Completely passive design with audiophile quality components assures the best possible noise and distortion performance
Frequency response 10Hz to 40kHz plus or minus 1dB into 10kOhm load
Distortion less than 0.002% THD @ 1kHz
Crosstalk better than –97dB
Maximum source impedance 1kOhm. Minimum load impedance 10kOhm
Available in 2 channel box or 8 channel single
space rack versions
2 Year warranty. Ebtech quality and reliability
Made in the U.S.A.
|
|
|
 |
