DT50 goes from the perfect little clean machine to a brutal, brooding badass with all necessary components to make each tone sing. The Channel switch is your ticket to total, one-touch analog and digital reconfiguration. Any combination of voicing, operating class and power tube mode can be saved to either channel. You’re not limited to just “clean” and “dirty” – you can have whatever you want.
Quickly dial in your tone, or take your time customizing a classic. The front-panel features two channels (with identical Drive, Bass, Mid, Treble, Presence, Reverb, and Channel Volume knobs), a Master Volume knob and a few well-placed switches (including channel, operating class and power tube mode). DT50 is so simple, you already know how to use it.
The sleek, boutique aesthetic is inspired by the vision of master amp designer Reinhold Bogner. Premium Tolex® is carefully wrapped around every curve and corner, and the black and gold treatment is classy but earthy for a stunning on-stage presentation.
New Version 1.20 Firmware is available for the DT50! To download your free firmware, you will need to download the Line 6 Monkey upgrading tool. You can find it here.|
Version 1.20 Features And Fixes:
Improved communication with POD HD500 via L6 LINK (see the L6 LINK Connectivity Guide for specifics)
Advanced HD modeling technology
Reinhold Bogner’s most flexible tube design
(2) 12AX7 preamp, (2) EL34 power amp (25W/50W)
Simple and straightforward 2-channel design
Each channel: Drive, Bass, Mid, Treble, Presence, Reverb, Channel Volume
High and Low inputs
Reconfigurable analog components (Class A/Class AB; Pentode/Triode)
Complete, one-touch analog reconfiguration (via Channel select switch)
1x12" Celestion® custom G12H90 speaker
L6 LINK™ in/thru connection for POD® HD integration
Serial effect loop with level control
Footswitch jack for channel switching
XLR direct out with cabinet simulation and ground lift switch
4, 8 and 16-ohm speaker outs