|
||||||||||||
|
||||||||||||
|
||||||||||||
|
Roger Mayer Kuro Kage
The Spitfire circuit is on the High Band and the Mongoose on the Low Band.These two classic circuits are our probably most popular circuits for Rock orientated music. They have stood the test of time and many famous bands still use them. They are not at all nasal sounding cleaning up superbly with the use of the guitar volume control. Now you can experience the unlimited combination of blending both tone and distortion to the nth degree with the Kuro Kage.
|
Features: There is choice of a hard wire output (true bypass) or two buffered outputs that can drive long cable lengths with no high frequency loss. These buffered outputs are disconnected when the hard wire output is being used. This means that all performance situations are catered for whether you want a true hard wire output or your situation calls for the advantages of buffered outputs. No more screws to loose!. Slide the front panel back and there is the battery. It could not be simpler or faster. A 6 layer PC Card with solid copper Power and Ground Planes provides complete RF and EMI shielding. The onboard PC connections are sandwiched between these. The outside aluminium case completes the total shielding. This additional shielding and very low impedance power and ground planes produces an ultimate low noise performance solution. We only use USA Carling Switches considered the best. 50Hrs or more using a premium grade alkaline 9 Volt type. An external AC adapter (not supplied) can be used and access is through a standard DC power jack situated next to the jack sockets. It uses the standard negative centre pin connection protocol used by many leading manufacturers. Internal onboard filtering ensures that optimum low noise performance is maintained and diode protection provides peace of mind in case or polarity setting mistakes. Connection protocol: It uses the standard negative centre pin connection protocol used by many leading manufacturers. Specifications: 9 volt DC. Regulated output is recommended. Current rating: 50mA or more. The position of the jack sockets and DC power jack are all on the same side of the enclosure and face away from you thus enabling the effect to be optimally positioned in pedal board set-ups. |
|
 |
