|
||||||||||||
|
||||||||||||
|
||||||||||||
|
Yamaha SW500 Powered Subwoofer, 500 watts, 15
The SW500 powered subwoofer makes adding massive bottom end to your sound system an easy operation. Built into the high-grade plywood bass reflex enclosure is a 500-watt power amplifier that drives the long-throw, cast-frame 15" driver. The amplifier utilizes Yamaha's EEEngine technology for greater performance and efficiency with low current draw, low heat and reduced weight.On its back panel, the SW500 has dual XLR inputs (which accept either mono or stereo sources) and two sets of XLR outputs (one that passes a full range signal and one that incorporates a 100 Hz high pass filter). To further enhance its sonic performance, the SW500 has a phase reverse switch and a control for adjusting low-end roll-off frequency.
A pole mount is provided for adding a full-range cabinet above the SW500.
|
Frequency Response: 40Hz-120Hz (-10dB) Maximum SPL: 122 dB (1m) Dimensions W/H/D: 19" x 24 3/8" x 24 1/4" Weight: 80 lbs. Driver: 15" cast frame, with 3" voice coil Enclosure Type: Bass Reflex Cabinet Material: Plywood Finish: Elastomic Polymer Coating Output Power: 500W @ 100Hz, THD= 1%, RL = 8" 650W burst power output Input sensitivity: +4dB Impedance: 30k Input Connectors: 2 x XLR-3-31 (balanced) Line Outputs: 2 x Thru out XLR-3-32 (balanced) 2 x High pass out XLR3-32 (balanced) (100Hz, 18dB/oct, +4dB) Controls: Cutoff frequency control: 80Hz to 100Hz Phase switch: Normal/Reverse Level Power Requirement: AC 120V/60Hz Power Consumption: 200W (avg) |
|
 |
